Choose Your Required Measurement Unit

Firstly choose your unit of measurement. There are 5 options: Millimetres, Centimetres, Metres, Inches and Feet.

We would prefer Millimetres if possible however feel free to use the unit with which you are most comfortable.

And remember the old adage "Measure Twice, Cut Once".

Choose Your Required Size

Next Choose Your Required Size.

These are the two sides of the piece you require.
Orientation is not shown and is up to you.
The relative size is shown to the right of the image of a person.

Choose Your Required Shape

Next Choose Your Required Shape.

Mirrors

Four options are available on the Mirror page: Square/Rectangle, Round/Oval, Arched, or Arc.


For Round the two size values X and Y need to be the same.
For ovals enter the smaller and larger of the two different diameters required as X and Y.

If you choose Arc a further measurement is required called the Shoulder Height which is the height you want the arc to start.
A box appears to enter this information.
and the image next to the figure changes to show you this.

Details Section

Choose Your Mirrors Thickness.

There are two options here: 4mm Mirror and 6mm Mirror.
The 6mm Mirror is slightly more rigid and is especially suitable for being screwed onto a bathroom wall.
The 4mm Mirror is suitable for when mirror is to be applied to a backboard with adhesive then mounted or for wardrobe doors, etc.
The choice is yours however and both are suitable depending on your requirements.

Choose Your Edging Type.

The choices are Polished Edge (which is a Smooth/Flat Edge) or Bevelled Edge (which is an Angled/Sloped Edge).
A picture appears to the right of the box showing an example.

Choose Your Fixings.

There are 6 options here: None, Screws, Clips, Adhesive, Concealed Fixings and Corner Clips.
A small description appears at the bottom of this section for each of the items.
If you choose concealed fixings a small box opens for you to choose the orientation of the mirror as these fixings are bonded to the back of the mirror, either Landscape or Portrait. If your mirror is square you can leave this at either.

Choose Your Number of Holes.

This option is for screw holes and is only available if you choose None or Screws from the Fixings dropdown.
If you require holes in a specific place please choose the appropriate number then use the Customer Notes section of the Confirm Order page to let us know where you want them or that you will be sending an e-mail to us with the details. N.B. These are screw holes ONLY not large holes for Electrical Sockets, etc. Please e-mail us for a price for sockets before ordering.

Choose Your Safety Backing.

This is a strong plastic film adhered to the back of the mirror as a safety measure should the mirror get broken. It holds the mirror together avoiding falling shards.
This option is required by law if the mirror is in a public place if the mirror has Screw, Clip, Concealed or Corner Clip fixings. We would also recommend this in all these situations even in a private dwelling.
Safety Backing should NEVER be used with Adhesive.

Add to Basket

Price

This is the price PER Item.

Quantity

Choose your item quantity using the plus and minus buttons or by entering the desired number in the box provided.

Add to Basket Button